EN
ar
bg
hr
cs
da
nl
fi
fr
de
el
hi
it
ko
no
pl
pt
ro
ru
es
sv
tl
iw
id
lv
lt
sr
sk
sl
uk
vi
et
hu
th
tr
fa
ms
hy
ka
ur
bn
mn
ta
kk
uz
ku
Real-Time Dam Safety Alerts with Differential Pressure Water Level Sensors
Key Takeaways An alert chain needs more than a sensor: define field in...
2-Core to 8-Core Hydrological Cables for Sensor Networks
2core / 4core / 6core / 8core Hydrological Cable
When you set up a groundwater monitoring borehole, the cable isn’t just a wire—it’s the link that carries power and data between your sensors and the logger at the surface. If you’re hooking up a single pressure transducer, a 2-core hydrological cable does the job. But add a temperature sensor or a conductivity probe, and suddenly you need more cores. Kingmach stocks hydrological cables in 2-core, 4-core, 6-core, and 8-core versions precisely because most monitoring projects don’t fit a one-size-fits-all spec. A thinner 2-core cable is easier to seal at the wellhead and lighter to handle; an 8-core bundle lets you combine multiple instruments in one drop without splicing extra lines. We’ve seen enough field installations to know that the right core count saves time and troubleshooting later.
Technical Detail
Configured around process stability, mold life, and long-term uptime.
Kingmach hydrological cables are built around tinned copper conductors with individual color-coded insulation, bundled and shielded to reduce electrical noise between channels. The jacket is typically a tough polyurethane or polyethylene, selected depending on whether the water contains hydrocarbons or abrasive particles. In the center, a steel or aramid strength member takes the hanging weight so the conductors don’t stretch. These cables come in stock diameters that match common cable gland sizes, but we regularly prepare custom assemblies—pre-terminated with weather-resistant connectors or cut to your specific length with bare leads. The choice between 2, 4, 6, and 8 cores really comes down to your sensor layout. Two cores handle a basic loop-powered instrument. Four cores fit a differential pressure sensor with temperature compensation. Six and eight cores are often used for multi-parameter sondes or when you want spare conductors for future expansion. Kingmach is a medium-scale manufacturer with a wide geotechnical instrument range, so the same team that understands your piezometer or data logger can help you pick the right cable. Custom options like dual-jacket, halogen-free sheathing, or special length markings are also on the table.
News
Industry updates
Differential Pressure Water Level Sensors for Dam Safety: 7 Engineering Advantages Explained
Key Takeaways The strongest fit is usually a confined, submerged, or s...
Kingmach Water Level Sensors for Dam Monitoring
Kingmach Water Level Sensors for Dam Monitoring: A Buyer's Guide to Differential Pre...
Products
Production modules
FAQ
Common technical questions
How do I decide between 2-core and 4-core hydrological cable?
If your downhole sensor only needs a power loop and a single analog signal, 2 cores are enough. As soon as you add a second analog channel—like a temperature sensor paired with a pressure transducer—you need at least 4 cores. We often recommend 4 cores even for simple setups just to have a spare pair for future sensors or a heater circuit in cold climates.
Can you supply the cable with connectors already attached?
Yes. Let us know the connector type your data logger or sensor expects—often a weatherproof circular connector or a simple strain-relief cap with bare wires—and we’ll assemble and test the termination before shipping.
What jacket material do you recommend for groundwater monitoring wells?
Polyurethane works well in clean water and offers good abrasion resistance. If there’s a risk of fuel or solvent contamination, we suggest a polyethylene jacket or specialty materials like fluoropolymer. Just describe your site conditions and we’ll advise.
Do these cables work with your own brand of pressure transducers?
They work with most industry-standard sensors, not only Kingmach instruments. The pinout and color code are documented so you can wire them to any logger. If you’re using our submersible pressure transmitters, we can provide the correct mating connectors.
What’s the maximum continuous length you can supply?
There’s no fixed limit; we cut to project requirements. Very long single runs—over 500 meters—might need a larger conductor gauge to minimize voltage drop. We’ll review your sensor power demands and signal type before confirming.
Need a solution for your project?
Share your product type, target capacity, and application requirements. Our team can review the details and recommend a practical next step.